Safety foot switch
GFS 2 VD
2-pedal type
With impulse wiping contacts GFS 2 IK VD: without switching impulse when unlocking foot switch; NO contact 13-14 is converted into positive break NC contact A by internal baffle after pressure point, Safety contact: 13-14 A, Signalling contact: 21-22
Max. 4 contacts per pedal, max. 3 pedals available
Wiring compartment
Technical data
General technical data
Applied standards
EN ISO 13849-1, EN 60947-5-1, GS-ET-15
Enclosure
aluminium die-cast, powder-coated
Pedal
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Protective shield
aluminium die-cast, powder-coated
Degree of protection
IP65 (IEC/EN 60529)
B10d (10 % load)
200 000
TM
max. 20 years
Connection
screw connection terminals
Cable cross-section
min. 0.5 mm², max. 2.5 mm² (rigid or flexible with conductor ferrules)
Cable entry
1 x M25 x 1.5
Contact material
silver
Switching system
slow action, positive break NC contacts A
Switching elements
1 NO/1 NC or 2 NO/2 NC contacts per pedal, type Zb
Actuating force
pressure point approx. 245 N
Utilisation category
AC-15
Rated impulse withstand voltage Uimp
6 kV
Rated insulation voltage Ui
500 V
Conditional short-circuit current
1100 A
Conventional thermal current Ithe
GFS 2 VD: 16 A, GFS 2 IK VD: 6 A
Rated operating current/voltage Ie/Ue
GFS 2 VD: 16 A/400 VAC, GFS 2 IK VD: 6 A/400 VAC
Contact load capacity
max. 400 VAC,
GFS 2 VD: max. 16 A (cos φ = 1),
GFS 2 IK VD: max. 6 A (cos φ = 1)
Short-circuit protection
GFS 2 VD: 16 A gG/gN fuse,
GFS 2 IK VD: 6 A gG/gN fuse
Ambient temperature
–25 °C … +80 °C
Mechanical life
> 100 000 operations
Approvals
ß
d *
] *
* depending on the variant
Downloads
Variants / Options
The following variants / options are available on request:
- Special finish in RAL colour tones
