Product features
sWave® wireless technology
Communication via UDP or TCP/IP (Server or Client - Mode)
Webserver based Setup
Transmitter/receiver assignment by teaching mode
LEDs for indication of operating state
SMA plug-in connector for external antenna
Notes
External antenna always required for optimum wireless range
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Degree of protection
IP20 (IEC/EN 60529)
Mounting
DIN rail mounting
Connection
terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
Network interface
10/100 Base-T Ethernet (Auto detection) via RJ 45
Software interface
TCP (Client, Server) / UDP / IP (DHCP) / ModbusTCP
Rated operating current/voltage Ie/Ue
max. 0.2 A/12 VDC - 15 % ... 24VDC + 10 %
Display
green LED: Reset state
orange LED: signalisation of telegram
Degree of pollution
2
Ambient temperature
0 °C … +55 °C
Storage and shipping temperature
–25 °C … +85 °C
Wireless approvals
Japan: ? ARIB STD-T108: 204-610002
Wireless technology
Protocol
sWave®
Frequency
916.5 MHz (Japan)
Transmission power
< 1 mW
Data rate
66 kbps
Channel bandwidth
520 kHz
Downloads
Other interesting products
Alternative wireless receiver with RS232 interface and 2 potential-free relay outputs (2 change-over contacts)
