Wireless optical sensor
RF 96 LT
sWave® wireless technology (SW868/SW915/SW917/SW922)
Light sensor: registration by light reflection
Power supply by Lithium battery (replaceable)
Low switching frequency < 1 Hz
Easy programming of receiver
Available with "LBT - Listen before Talk" software (necessary in conjunction with potential interference)
Technical data
General technical data
Applied standards
EN 60947-5-2, EN 61000-6-2, EN 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP54 (IEC/EN 60529)
Voltage source
lithium battery (replaceable)
Sensor
IR reflective light sensor
Ambient temperature
0 °C … +65 °C
Operation cycles
max. 12000 telegrams with repetitions/h; SW922: max. 1440 telegrams/h
Switching frequency
max. 1 Hz
Switching distances
white paper: 170 mm
grey card 18% reflection: 90 mm
storage box blue: 90 mm
storage box red: 120 mm
storage box black: 40 mm
Standby current
130 µA sensor not actuated,
250 µA sensor actuated
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Note
status signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
delivery state: jumper position without status signal
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Downloads
Variants / Options
The following variants / options are available on request:
- LBT - Listen before Talk software (necessary in conjunction with potential interference)
